![]() |
Electronic Engineering News Digest |
COMPONENT NEWS | INDUSTRY NEWS | RoHS/WEEE NEWS |
|
|
The ADM1185 is an integrated four channel voltage monitoring device. A 2.7V to 5.5V power supply is required on the VCC pin to power the device. Four precision comparators monitor four voltage rails on the VIN1-VIN4 pins. [Read more ]
The ADM3486E/ADM3490E/ADM3491E are 3.3 V low power data transceivers with ±15 kV ESD protection suitable for fulland half-duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]
The ADM3486E/ADM3490E/ADM3491E are 3.3 V low power data transceivers with ±15 kV ESD protection suitable for fulland half-duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]
The ADM3486E/ADM3490E/ADM3491E are 3.3 V low power data transceivers with ±15 kV ESD protection suitable for fulland half-duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]
The ADSP-21375 EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-2137x SHARC® Processors via a USB-based, PC-hosted tool set. [Read more ]
The third generation of SHARC® Processors, which includes the ADSP-21375 and ADSP-21371, offers increased performance, audio and application-focused peripherals, and new memory configurations capable of supporting the latest surround-sound decoder algorithms. [Read more ]
The AD7690/AD7691 is a 18-bit, successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD. It contains a low power, high speed, 18-bit sampling ADC and a versatile serial interface port. [Read more ]
The AD8664 is a quad rail-to-rail output single supply amplifiers that use Analog Devices’ patented DigiTrim® trimming technique to achieve low offset voltage. [Read more ]
The SSM2302 is a fully integrated, high efficiency, Class-D stereo audio amplifier. It is designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.0 V supply. [Read more ]
Meets Specification for Both XDR™ Memory Systems and FlexIO™ Processor Bus for Use in Consumer Electronics, Game Consoles, Networking, and Advanced Computing Systems SAN JOSE Calif. [Read more ]
San Jose, Calif., Aug. 7, 2006 — Micrel Inc., (Nasdaq:MCRL), an industry leader in analog, high bandwidth communications and Ethernet IC solutions, today launched a new family of tiny dual ultra-low dropout voltage (ULDO™) linear regulators. [Read more ]
The ADuM320x* are dual-channel, digital isolators based on Analog Devices' iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as optocoupler devices. [Read more ]
The ADuM320x* are dual-channel, digital isolators based on Analog Devices' iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as optocoupler devices. [Read more ]
The AD7796/AD7797 is a complete analog front end for high precision bridge sensor applications such as weighscales. The AD7796/AD7797 contains a - ADC capable of 16/24-bit resolution. [Read more ]
The AD7796/AD7797 is a complete analog front end for high precision bridge sensor applications such as weighscales. The AD7796/AD7797 contains a - ADC capable of 16/24-bit resolution. [Read more ]
New Page 1Winbond will release a series new voice chip, W588Dxxx series IC, with high sound quality solution for toy market. The W588Dxxx series build in Noise Shaping and high resolution audio output driving technology that developing by Winbond to reach high sound quality. [Read more ]
San Jose, Calif., Aug. 2, 2006— Micrel Inc., (Nasdaq:MCRL), an industry leader in analog, high bandwidth communications and Ethernet IC solutions, today launched the KSZ8862-16MQL and KSZ8862-32MQL, the latest members of its 2-port switch family with generic bus interface. [Read more ]
Media Contact Gayle Bullock National Semiconductor (408) 721-2033 gayle. [Read more ]
MILPITAS, CA – August 9, 2006 – Linear Technology Corporation announces new wider temperature range versions of its LT1763 and LT1764A high current, low noise linear regulators. [Read more ]
MOSFETs optimize dc-dc conversion and reduce power losses at critical current levels in CPU/GPU power delivery, dc-dc converters and low and high side switchingPhoenix, Ariz. – Aug. [Read more ]
Worcester, MA, August 11, 2006 Allegro announces a new line of low-power off-line SMPS primary regulators targeted at the consumer electronic, industrial appliance and home appliance markets. [Read more ]
The ADM3070E–ADM3076E are 3.3V, low power data transceivers with ±15kV ESD protection suitable for full and half duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]
The ADM3070E–ADM3076E are 3.3V, low power data transceivers with ±15kV ESD protection suitable for full and half duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]
The ADM3070E–ADM3076E are 3.3V, low power data transceivers with ±15kV ESD protection suitable for full and half duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]
The ADM3070E–ADM3076E are 3.3V, low power data transceivers with ±15kV ESD protection suitable for full and half duplex communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with TIA/EIA standards RS-485 and RS-422. [Read more ]