Fabricated using the new complimentary silicon-germanium (SiGe) BiCom-III process, the THS7327 is a low-power, single-supply 2.7-V to 5-V, 3-channel integrated video buffer with H and V Sync signal paths. It incorporates a selectable 5th order Butterworth anti-aliasing filter on each channel. The 9-MHz is a perfect choice for... [Read more…]

San Jose,Calif., Sept. 26, 2006—Altera Corporation (NASDAQ:ALTR) and Northwest Logic today announced the immediate availability of a hardware-proven, 667-Mbps DDR2 SDRAM interface for Altera’s high-density Stratix®II and StratixIIGX FPGAs. [Read more…]

Cypress's USB Technology and Symwave's Sensing and Software Expertise Combine To Protect Critical Data with Personalization and Convenience for Users SAN JOSE, Calif. and SAN DIEGO, Calif., -- September 28, 2006 - Cypress Semiconductor Corp. (NYSE: CY) and Symwave, Inc. [Read more…]

Low-Power Device, Now in Production, Allows Mobile Handset Makers to Add High-Speed USB Without Sacrificing Other Functions SAN JOSE, Calif., September 28, 2006 - Cypress Semiconductor Corp. [Read more…]

(September 27, 2006) (OTC: SIPX.PK), - Sipex is pleased to annouce the SP3080E, the first product available in a family of advanced 5 volt RS485 transceivers. [Read more…]

(September 28, 2006) (OTC: SIPX.PK), - Sipex Corporation today announced two new advanced RS-232 transceivers, the SP3244E and SP3245E. These devices are the first to incorporate the Auto On-line® Plus feature. [Read more…]

austriamicrosystems (SWX: AMS), a leading global designer and manufacturer of analog integrated circuits (ICs) for communication, industrial, medical and automotive applications, today introduces the AS1109 8-channel constant current LED driver with advanced error diagnostic for open and shorted... [Read more…]

MILPITAS, CA – September 28, 2006 – Linear Technology Corporation announces a new family of ultralow power op amps that set a new standard for precision low voltage operation and tiny footprint. [Read more…]

The ISL59311 is a high bandwidth triple differential amplifier with integrated encoding of video sync signals. The inputs are suitable for handling high speed video or other communications signals in either single-ended or differential form, and the common-mode input range extends all the way to the negative rail enabling ground-referenced signalling in single supply applications. The high bandwidth enables differential signalling onto standard twisted-pair or coax with very low harmonic distortion, while internal feedback ensures balanced gain and phase at the outputs reducing radiated EMI and harmonics.  [Read more…]

The GC5318 is a high-density multi-channel communications signal processor integrated circuit that provides digital upconversion optimized for cellular base transceiver systems. The device supports both UMTS and CDMA2000 (CDMA) air interface cellular standards. The chip provides up to 24 CDMA digital upconverter (DUC) channels... [Read more…]

The ONET1191P is a high-speed, 3.3-V limiting amplifier for copper-cable and fiber-optic applications with data rates up to 11.3 Gbps. This device provides a gain of about 40 dB which ensures a fully differential output swing for input signals as low as 5 mVpp. The output amplitude can be adjusted from 400 mVpp to 700 mVpp.... [Read more…]

The THS4520 is a wideband, fully differential operational amplifier designed for 5-V data acquisition systems. It has very low noise at 2 nV/Hz, and low harmonic distortion of -115 dBc HD2 and -123 dBc HD3 at 100 kHz with 8 VPP, and 1-k load. The slew rate is 570 V/µs, and with a settling time of 7 ns to 0.1% (2-V step),... [Read more…]

The ADP3207A is a high efficiency, multiphase, synchronous,buck-switching regulator controller optimized for convertingnotebook battery voltage into the core supply voltage requiredby high performance Intel processors. [Read more…]

The ADM1178 is an integrated hotswap controller and current sense amplifier that offers digital current and voltage monitoring via an on-chip 12-bit ADC, communicated through an I2C interface. [Read more…]

The ADM1177 is an integrated hot-swap controller which offers digital current and voltage monitoring via an on-chip 12-bit ADC, communicated through an I2C interface. An internal current sense amplifier senses voltage across the sense resistor in the power path via the VCC and SENSE pins. [Read more…]

The ADM1175 is an integrated hot swap controller and current sense amplifier that offers digital current and voltage monitoring via an on-chip, 12-bit analog-to-digital converter (ADC), communicated through an I2C interface. [Read more…]

Praetorian and Centurion EMI Filter ASIP Devices Address Critical Performance and Space Requirements [Read more…]

The ISL59115 is a triple channel reconstruction filter with a -3dB roll-off frequency of 9MHz. Operating from a single supply ranging from +2.5V to +3.6V and drawing only 4.5mA quiescent current, the ISL59115 is ideally suited for low power, battery-operated applications. Additionally, enable pins shut the part down in under 14ns.  [Read more…]

The ISL59118 is a dual video driver/reconstruction filter with a -3dB roll-off frequency of 9MHz. Operating from single supplies ranging from +2.5V to +3.6V and drawing only 4.5mA quiescent current, the ISL59118 is ideally suited for low power, battery-operated applications. Additionally, enable pins shut the part down in under 14ns.  [Read more…]

The ISL59114 is a YC (S-video) reconstruction filter with a -3dB roll-off frequency of 9MHz and summer amplifier to create the composite video signal. Operating from a single supply ranging from +2.5V to +3.6V and drawing only 4.5mA quiescent current, the ISL59114 is ideally suited for low power, battery-operated applications. Additionally, an enable pin shuts the part down in under 14ns.  [Read more…]

The ISL59117 is a triple channel reconstruction filter with a -3dB roll-off frequency of 9MHz. Operating from single supplies ranging from +2.5V to +3.6V and drawing only 3.9mA quiescent current, the ISL59117 is ideally suited for low power, battery-operated applications. Additionally, enable pins shut the part down in under 14ns.  [Read more…]

The ISL59116 is a YC reconstruction filter with a -3dB roll-off frequency of 9MHz and summer amplifier to create the composite video signal. Operating from single supplies ranging from +2.5V to +3.6V and drawing only 4.6mA quiescent current, the ISL59116 is ideally suited for low power, battery-operated applications. Additionally, an enable high pin shuts the part down in under 14ns.  [Read more…]

The Intersil ISL54058 device contains precision, bidirectional, analog switches configured as a dual 4-channel multiplexer/demultiplexer, designed to operate from a single +1.6V to +3.6V supply.  [Read more…]

The Intersil ISL54057 device contains precision, bidirectional, analog switches configured as a differential 4-channel multiplexer/demultiplexer, designed to operate from a single +1.6V to +3.6V supply. The devices have an inhibit pin to simultaneously open all signal paths.  [Read more…]

The TMS320F28044 device, member of the TMS320C28x™ DSP generation, is a highly integrated, high-performance solution for demanding control applications. Throughout this document, TMS320F28044 is abbreviated as F28044. ... [Read more…]