The TPS7510x linear low dropout (LDO) matching LED current source is optimized for low power keypad and navigation pad LED backlighting applications. The device provides a constant current to up to four unmatched LEDs organized in two banks of two LEDs each in a common-cathode topology. Without an external resistor, the current... [Read more…]

The bq2022A is a 1K-bit serial EPROM containing a factory-programmed, unique 48-bit identification number, 8-bit CRC generation, and the 8-bit family code (09h). A 64-bit status register controls write protection and page redirection. The bq2022A SDQ™ interface requires only a single connection and a ground return. The... [Read more…]

The PCM3793/94 is a low-power stereo CODEC designed for portable digital audio applications. The device integrates stereo digital speaker amplifier, headphone amplifier, line amplifier, line input, boost amplifier, microphone bias, programmable gain control, analog mixing, sound effects, and automatic level control (ALC). It... [Read more…]

The PCM3793/94 is a low-power stereo CODEC designed for portable digital audio applications. The device integrates stereo digital speaker amplifier, headphone amplifier, line amplifier, line input, boost amplifier, microphone bias, programmable gain control, analog mixing, sound effects, and automatic level control (ALC). It... [Read more…]

(September 29, 2006) (OTC: SIPX.PK), - Sipex Corporation today announces the SP8130 APC (Advanced Power Control) solution, a differentiated output optical power sensor designed for automatic laser power control in DVD and CD recorder applications. [Read more…]

MILAN, Italy--(BUSINESS WIRE)--Oct. 3, 2006--Freescale Semiconductor (NYSE:FSL) (NYSE:FSL.B) has introduced a 16-bit microcontroller (MCU) designed for the next wave in automotive instrumentation clusters. The MC9S12XHZ512 MCU is the industry's first instrumentation cluster MCU featuring an integrated thin-film transistor (TFT) display drive. [Read more…]

Easy, robust and reliable broadband communication for mobile and handheld applications [Read more…]

The new CM5100 features a fully compliant, MDDI based serial client, an integrated display controller with embedded memory that supports primary thin film transistor (TFT) liquid crystal displays (LCDs) with resolutions up to QVGA (320x240) and secondary displays with up to QCIF+ (176x220) resolution. [Read more…]

The TLK1211IRCP gigabit ethernet transceiver provides for ultrahigh-speed, full-duplex, point-to-point data transmissions. This device is based on the timing requirements of the 10-bit interface specification by the IEEE 802.3 gigabit ethernet specification and is also compliant with the ANSI X3.230-1994 (FC-PH) fibre channel... [Read more…]

The SN65LVDS306 receiver deserializes FlatLink™3G-compliant serial input data to 27 parallel data outputs. The SN65LVDS306 receiver contains one shift register to load 30 bits from one serial input and latches the 24 pixel bits and 3 control bits out to the parallel CMOS outputs after checking the parity bit. If the parity... [Read more…]

The SN65LVDS304 receiver deserializes FlatLink™3G-compliant serial input data to 27 parallel data outputs. The SN65LVDS304 receiver contains one shift register to load 30 bits from 1 or 2 serial inputs and latches the 24 pixel bits and 3 control bits out to the parallel CMOS outputs after checking the parity bit. If the... [Read more…]

MILPITAS, CA – September 28, 2006 – Linear Technology Corporation announces a new family of ultralow power op amps that set a new standard for precision low voltage operation and tiny footprint. [Read more…]

Editorial Contact: Reader/Literature Inquiries: Michelle Figor 1-888-MCU-MCHP 480-792-4111 www.microchip.com/MCP73833 michelle. [Read more…]

The 8-pin integrated circuit contains all of the features needed to develop a high power IEEE 802.3af style powered device (PD). The TPS2376-H offers a higher current limit and increased thermal dissipation capability over the TPS237X family of devices. The TPS2376-H implements a fully compliant PoE interface while permitting... [Read more…]

The ADS8365 includes six, 16-bit, 250kSPS analog-to-digital converters (ADCs) with six fully differential input channels grouped into three pairs for high-speed simultaneous signal acquisition. Inputs to the sample-and-hold amplifiers are fully differential and are maintained differential to the input of the ADC. This architecture... [Read more…]

The TPA6205A1 is a 1.25-W mono fully differential amplifier designed to drive a speaker with at least 8- impedance while consuming less than 37 mm2 (ZQV package option) total printed-circuit board (PCB) area in most applications. This device operates from 2.5 V to 5.5 V, drawing only 1.7 mA of quiescent supply current.... [Read more…]

The OPAx365 zerø-crossover series rail-to-rail highperformance CMOS operational amplifiers are optimized for very low voltage, single-supply applications. Rail-to-rail input/output, low-noise (4.5nV/Hz) and high-speed operations (50MHz Gain Bandwidth) make them ideal for driving sampling analog-to-digital converters... [Read more…]

MILPITAS, CA – October 5, 2006 – Linear Technology Corporation announces the LT3506 and LT3506A, dual current mode PWM step-down DC/DC converters with two 2A power switches packaged in a 16-lead 5mm x 4mm DFN package. Each channel is capable of delivering up to 1.6A of output current. [Read more…]

MILPITAS, CA – October 5, 2006 – Linear Technology Corporation announces the LT3506 and LT3506A, dual current mode PWM step-down DC/DC converters with two 2A power switches packaged in a 16-lead 5mm x 4mm DFN package. Each channel is capable of delivering up to 1.6A of output current. [Read more…]

The PTH04T260/261W is a high-performance, 3-A rated, non-isolated power module. This regulator represents the 2nd generation of the PTH series of power modules which include a reduced footprint and improved features. The PTH04T261W is optimized to be used in applications requiring all ceramic capacitors. Operating from an... [Read more…]

The PTH04T240/241W is a high-performance 10-A rated, non-isolated power module. These modules represent the 2nd generation of the popular PTH series power modules and include a reduced footprint and additional features. The PTH04T241W is optimized to be used with all ceramic capacitors. Operating from an input voltage range... [Read more…]

The PTH04T230/231W is a high-performance, 6-A rated, non-isolated power module. This regulator represents the 2nd generation of the PTH series of power modules which include a reduced footprint and improved features. The PTH04T231W is optimized to be used in applications requiring all ceramic capacitors. Operating from an input... [Read more…]

Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets, announces the release of the HMC536LP2(E) GaAs MMIC Positive Control T/R Switch for WiMAX, WiBro, Fixed Wireless, Cellular/3G, and Test and Measurement applications from DC to 6 GHz in a 2 x 2 mm SMT (LP2) package. [Read more…]

Munich, Germany, October 9, 2006 – Infineon Technologies today introduced a wireless broadband integrated access device (IAD) reference design for Digital Home Networks. [Read more…]

The chip is a single LDO offering an ultra-low dropout of 40mV@150mA, more than 75db Power Supply Rejection Ratio (PSRR) and ultra-low output noise - all in an extremely compact form factor. [Read more…]