• Operation Over 4.5-V to 28-VInput Range
• Fixed-Frequency Voltage-Mode Controller
• Integrated Unity Gain Amplifier for Remote Output Sensing
• Predictive Gate Drive™ Generation II for Improved Efficiency
• < 1% Internal 700-mV Reference
• Input Voltage Feed Forward Control
• Prebiased Output Compatible
• Internal Gate Drive Outputs for High-Side and Synchronous N-Channel MOSFETs
• Switching Frequency Programmable to 1 MHz
• 20-Pin QFN Package
• Thermal Shutdown Protection
• Software Design Tool and EVM Available
• APPLICATIONS
  • Power Modules
  • Networking/Telecom
  • Industrial
  • Servers

The TPS40075 is a mid voltage, wide input (4.5-V to 28-V),synchronous, step-down controller, offering design flexibility for a variety of user programmable functions, including; soft start, UVLO, operating frequency, voltage feed-forward and high-side FET sensed short circuit protection.

The TPS40075 drives external N-channel MOSFETs using second generation Predictive Gate Drive to minimize conduction in the body diode of the low side FET and maximize efficiency. Pre-biased outputs are supported by not allowing the low side FET to turn on until the voltage commanded by the closed loop soft start is greater than the pre-bias voltage. Voltage feed forward provides good response to input transients and provides a constant PWM gain over a wide input voltage operating range to ease compensation requirements. Programmable short circuit protection provides fault current limiting and hiccup recovery to minimize power dissipation with a shorted output. The 20 pin QFN package gives good thermal performance and a compact footprint.