Electronic Engineering News Digest Electronic Engineering News Digest
Electronic Engineering News COMPONENT NEWS | INDUSTRY NEWS | RoHS/WEEE NEWS |   
Latest News

ISL54217 - USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer) - The Intersil ISL54217 is a single supply dual SP3T analog switch that operates from a single supply in the range of 2.7V to 4.6V. It was designed to multiplex between audio stereo signals and two different USB 2.0 high speed differential data signals. The audio channels allow signal swings below ground, allowing the multiplexing of voice and data signals through a common headphone connector in Personal Media Players and other portable battery powered devices. 

Cree Announces Sample Release of New, Highly-Efficient 120-watt GaN HEMT Microwave Transistor - DURHAM, N.C., DECEMBER 17, 2008 — Cree, Inc. (Nasdaq: CREE), announces the sample release of a highly efficient 120-watt GaN HEMT microwave transistor for general-purpose military and industrial applications such as electronic warfare, tactical communications, radar, instrumentation and direct video broadcast applications. This transistor provides outstanding RF power performance over wide instantaneous bandwidths compared to other technologies such as GaAs MESFET or Si LDMOSFET.

Vishay Releases Industry’s First White PowerSMD LEDs to Utilize InGaN/TAG on Sapphire Technology in CLCC-2Flat Ceramic Package With Ultra-Low 0.75-mm Profile - VLMW84.. devices combine low thermal resistance down to 25 K/W and high optical power from 5600 mcd to 14000 mcd for high-volume applications.

MAX16834 - Highly Efficient, Flexible HB LED Driver Supports Green Lighting Designs - The MAX16834 is a current-mode, HB LED driver for boost, buck-boost, SEPIC, and high-side buck topologies. This device reduces the size, complexity, and cost of LED driver solutions, simplifying the implementation of green lighting technology.

Amplifiers and Linear TPA2100P1 19-Vpp Mono Class-D Audio Amplifier for Piezo/Ceramic Speakers (TPA2100) - The TPA2100P1 (sometimes referred to as TPA2100) is a mono, Class-D audio power amplifier with integrated DC-DC converter designed for piezo and ceramic speakers. The TPA2100P1 (TPA2100) is capable of driving a ceramic / piezo speaker with 19 VPP (6.7 VRMS) from a 2.5 V power supply at less than 1% THD+N.The DC-DC converter...

Power Management BQ24104 Synchronous Switchmode, Li-Ion & Li-Pol Charge Mngmt IC (bqSwitcher) - The bqSWITCHER series are highly integrated Li-ion and Li-polymer switch-mode charge management devices targeted at a wide range of portable applications. The bqSWITCHER series offers integrated synchronous PWM controller and power FETs, high-accuracy current and voltage regulation, charge preconditioning, charge...

Power Management BQ27541 Single Cell Li-Ion Battery Fuel Gauge for Battery Pack Integration - The Texas Instruments bq27541 Li-Ion battery fuel gauge is a microcontroller peripheral that provides fuel gauging for single-cell Li-Ion battery packs. The device requires little system microcontroller firmware development for accurate battery fuel gauging. The bq27541 resides within the battery pack or on the system's...

Power Management TPS54232 2A, 28V, 1MHz Step Down SWIFT (tm) DC/DC Converter with Eco-Mode (tm) - The TPS54232 is a 28-V, non-synchronous buck converter that integrates a low Rds(on) high side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1 µA shutdown supply current allows the device to be used in battery powered applications....

Power Management TPS650250 Power Management IC for Li-Ion Powered Systems - The TPS650250 is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS650250 provides three highly efficient, step-down converters targeted at providing the core voltage, peripheral, I/O and memory rails in a processor based system. All three...

Power Management TPS71401 10V, Single Output LDO, 80mA, Adj.(1.2 to 8.88V),Low Quiescent Current - The TPS714xx low-dropout (LDO) voltage regulators offer the benefits of wide input voltage range, low-dropout voltage, low-power operation, and miniaturized packaging. These devices, which operate over an input range of 2.5V to 10V, are stable with any capacitor ≥ 0.47µF. The 2.5V to 10V input voltage range, combined...

Power Management TPS71433 10V Single Output LDO, 80mA, Fixed(3.3V), Low Quiescent Current - The TPS714xx low-dropout (LDO) voltage regulators offer the benefits of wide input voltage range, low-dropout voltage, low-power operation, and miniaturized packaging. These devices, which operate over an input range of 2.5V to 10V, are stable with any capacitor ≥ 0.47µF. The 2.5V to 10V input voltage range, combined...

GCT’s GDM7205K is the first and only monolithic single-chip solution that is WiMAX Forum Certified - GCT’s GDM7205K is the first and only monolithic single-chip solution that is WiMAX Forum Certified™ San Jose CA, September 3, 2008 - GCT Semiconductor, a leading supplier of Mobile WiMAX solutions to the global market, today announced that the industry's first Mobile WiMAX 2.

Fujitsu Develops CMOS Logic-Based High-Voltage Transistor for Power Amplifiers - Fujitsu Laboratories Limited and Fujitsu Microelectronics Limited today announced the development of a CMOS logic process-based high-voltage transistor featuring high breakdown voltage, suitable for power amplifiers used in wireless devices. As a world's first, Fujitsu developed a 45 nanometer (45nm)-generation CMOS-based transistor capable of handling 10V power output, thus enabling the transistor to handle high-output requirements necessary for power amplifiers used in WiMAX and other high-frequency applications. The new technology makes it possible for power amplifiers to be formed on the same die as CMOS-logic control circuitry to achieve single-chip integration, thereby making high-performance, low-cost power amplifiers feasible.

Micrel Tunes In With New Fully Integrated, Wide-Input Range Boost Regulators - Micrel Tunes In With New Fully Integrated, Wide-Input Range Boost Regulators San Jose, Calif., Dec. 16, 2008 — Micrel Inc.

NEC Electronics Extends Support for Automotive Audio and Navigation Control Systems with New 32-Bit Microcontrollers Boasting Industry's Highest Built-In Flash Memory Capacity - New V850E/Sx3-H Microcontrollers Offer 1.5 Megabytes of Flash Memory, Improved CPU Performance and Integrated Noise-Reduction Circuitry KAWASAKI, Japan, DUESSELDORF, Germany, SANTA CLARA, Calif.

News ArchiveElectronic News Digest RSS Feed
Add to My Yahoo! Add to Google Add to del.icio.us Add to Blinklist Add to Shadows
Vishay Siliconix Releases New 20-V and 30-VP-Channel Power MOSFETs With Industry’s Lowest On-Resistance

Vishay Siliconix Releases New 20-V and 30-VP-Channel Power MOSFETs With Industry’s Lowest On-Resistance

The devices will be used as the adaptor switch and for load switching applications in notebook computers and industrial/general systems. Adaptor switches (switching between the adaptor/wall power and the battery power) are always on and drawing current. The lower on-resistance of the Si7135DP and Si7633DP translates into lower power consumption, saving power and prolonging battery life between charges. [Read more...]

 

Siliconix Releases First 20-V and 30-V N-Channel TrenchFET Gen III Power MOSFETs WithTurboFET Technology

04.12.2008 04:30 - Source: Vishay

Devices Feature On-Resistance Times Gate Charge FOM Down To 76.6 m-nC at 4.5 V and 117.60 m-nC at 10 V in PowerPAK® 1212-8 Package Type

MALVERN, PENNSYLVANIA — Dec. 3, 2008 — Vishay Intertechnology, Inc. (NYSE: VSH) today expanded its family of Gen III TrenchFET® power MOSFETs with the release of two 20-V and two 30-V n-channel devices that are the first to offer TurboFET™ technology, which utilizes a new charge balanced drain structure to lower the gate charge by up to 45 %, enabling significantly lower switching losses and faster switching.

The 20-V SiS426DN device offers the industry’s lowest on-resistance times gate charge for a device with this voltage rating in the 3-mm by 3-mm PowerPAK® 1212-8 footprint. This key figure of merit (FOM) for MOSFETs in dc-to-dc converters is 76.6 m-nC at 4.5 V and 117.60 m-nC at 10 V for the SiS426DN, which features a low typical gate charge of 13.2 nC at a 4.5-V gate drive and 28 nC at a 10-V gate drive.

Compared to the closest competing devices, these specifications represent a reduction in gate charge of 45 % at 4.5 V and 36 % at 10 V, and a 50 % lower FOM. Lower gate charge translates into more efficient switching at all frequencies, and in particular gives the designer the option to operate at higher frequencies, which enables the use of smaller passive components in dc-to-dc converters.

Vishay’s 30-V TurboFET offering includes the new Si7718DN in the PowerPAK 1212-8, and the Si7784DP in the PowerPAK SO-8. Both MOSFETs offer typical gate charge of 13.7 nC at 4.5 V and 30 nC at 10 V, and on-resistance times gate charge FOMs of 112.34 m-nC at 4.5 V and 180 m-nC at 10 V. A PowerPAK SO-8 version of the 20-V SiS426DN device, the SiR496DP, is also available for high-current applications. All devices released today are halogen-free and 100 % Rg and UIS tested.

The devices will be used as the high-side MOSFET in synchronous buck converters, helping to save power in notebook computers, voltage regulator modules (VRMs), servers, and other systems using point-of-load (POL) power conversion.

Device Specification Table:

Part numberSiS426DNSiR496DPSi7718DNSi7784DP
PackagePowerPAK 1212-8PowerPAK SO-8PowerPAK 1212-8PowerPAK SO-8
VDS2030
RDS(on) at 4.5 V5.8 m8.2 m
RDS(on) at 10 V4.2 m6 m
QG (Typ.) at 4.5 V13.2 nC13.7 nC
QG (Typ.) at 10 V28 nC30 nC
RDS(on) x QG @ VGS = 4.5 V76.6 m-nC112.34 m-nC
RDS(on) x QG @ VGS = 10 V117.6 m-nC180 m-nC

Samples and production quantities of the new Gen III power MOSFETs with TurboFET technology are available now, with lead times of 10 to 12 weeks for large orders.

TurboFET

Products mentioned:

This release in:

Original text is here