• High-Performance Static CMOS Technology
  • 100 MHz (10-ns Cycle Time)
  • 60 MHz (16.67-ns Cycle Time)
  • Low-Power (1.8-V Core, 3.3-V I/O) Design
• JTAG Boundary Scan Support⁽¹⁾
• High-Performance 32-Bit CPU (TMS320C28x)
  • 16 x 16 and 32 x 32 MAC Operations
  • 16 x 16 Dual MAC
  • Harvard Bus Architecture
  • Atomic Operations
  • Fast Interrupt Response and Processing
  • Unified Memory Programming Model
  • Code-Efficient (in C/C++ and Assembly)
• On-Chip Memory
  • F2809: 128K X 16 Flash, 18K X 16 SARAM
       F2808: 64K X 16 Flash, 18K X 16 SARAM
       F2806: 32K X 16 Flash, 10K X 16 SARAM
       F2802: 32K X 16 Flash, 6K X 16 SARAM
       F2801: 16K X 16 Flash, 6K X 16 SARAM
       9501: 16K X 16 Flash, 6K X 16 SARAM
       F2801x: 16K X 16 Flash, 6K X 16 SARAM
  • 1K x 16 OTP ROM (Flash Devices Only)
  • C2802: 32K X 16 ROM, 6K X 16 SARAM
       C2801: 16K X 16 ROM, 6K X 16 SARAM
• Boot ROM (4K x 16)
  • With Software Boot Modes (via SCI, SPI, CAN, I²C, and Parallel I/O)
  • Standard Math Tables
• Clock and System Control
  • Dynamic PLL Ratio Changes Supported
  • On-Chip Oscillator
  • Watchdog Timer Module
• Any GPIO A Pin Can Be Connected to One of the Three External Core Interrupts
• Peripheral Interrupt Expansion (PIE) Block That Supports All 43 Peripheral Interrupts
• 128-Bit Security Key/Lock
  • Protects Flash/OTP/L0/L1 Blocks
  • Prevents Firmware Reverse Engineering
• Three 32-Bit CPU Timers
• Enhanced Control Peripherals
  • Up to 16 PWM Outputs
  • Up to 6 HRPWM Outputs With 150 ps MEP Resolution
  • Up to Four Capture Inputs
  • Up to Two Quadrature Encoder Interfaces
  • Up to Six 32-bit/Six 16-bit Timers
• Serial Port Peripherals
  • Up to 4 SPI Modules
  • Up to 2 SCI (UART) Modules
  • Up to 2 CAN Modules
  • One Inter-Integrated-Circuit (I²C) Bus
• 12-Bit ADC, 16 Channels
  • 2 x 8 Channel Input Multiplexer
  • Two Sample-and-Hold
  • Single/Simultaneous Conversions
  • Fast Conversion Rate:
    80 ns - 12.5 MSPS (F2809 only)
    160 ns - 6.25 MSPS (280x, 9501)
    267 ns - 3.75 MSPS (F2801x)
  • Internal or External Reference
• Up to 35 Individually Programmable, Multiplexed General-Purpose Input/Output (GPIO) Pins With Input Filtering
• Advanced Emulation Features
  • Analysis and Breakpoint Functions
  • Real-Time Debug via Hardware
• Development Support Includes
  • ANSI C/C++ Compiler/Assembler/Linker
  • Supports TMS320C24x™/240x Instructions
  • Code Composer Studio™ IDE
  • DSP/BIOS™
  • Digital Motor Control and Digital Power Software Libraries
• Low-Power Modes and Power Savings
  • IDLE, STANDBY, HALT Modes Supported
  • Disable Individual Peripheral Clocks
• Package Options
  • Thin Quad Flatpack (PZ)
  • MicroStar BGA™ (GGM, ZGM)
• Temperature Options:
  • A: –40°C to 85°C (PZ, GGM, ZGM)
  • S: –40°C to 125°C (PZ, GGM, ZGM)
  • Q: –40°C to 125°C (PZ)

Code Composer Studio, DSP/BIOS, MicroStar BGA, TMS320C28x, C28x, TMS320C2000 are trademarks of Texas Instruments.
eZdsp is a trademark of Spectrum Digital.

⁽¹⁾IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.

The TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801, TMS320F28015, TMS320F28016, TMS320C2802, and TMS320C2801, devices, members of the TMS320C28x™ DSP generation, are highly integrated, high-performance solutions for demanding control applications. UCD9501 is a member of the same device family specifically targeting power management control applications.

Throughout this document, TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801/UCD9501, TMS320C2802, TMS320C2801, TMS320F28015, and TMS32028016 are abbreviated as F2809, F2808, F2806, F2802, F2801/9501, F28015, F28016, C2802, and C2801, respectively. TMS320F28015 and TMS320F28016 are abbreviated as F2801x. TMS320x280x device reference guides, flash tools, and other collateral are applicable to the UCD9501 device as well.

NOTE: Information/data on TMS320F2809 is PRODUCT PREVIEW. PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.