	Electronic Engineering News Digest
COMPONENT NEWS \| INDUSTRY NEWS \| RoHS/WEEE NEWS \|

Latest News

IR Introduces High Performance MOSFETs for Power Supplies and Electric Motors - - EL SEGUNDO, Calif., May 19, 2008 (BUSINESS WIRE) -- International Rectifier, IR(R) (NYSE: IRF), a world leader in power management technology, today introduced a new family of 60 V and 75 V MOSFETs optimized for industrial battery applications such as E-bikes, scooters and utility carts.

Renesas Technology Develops Future 32-bit RX600 Series CISC MCUs, Based on Renesas' Next-Generation ‘RX’ Architecture - TOKYO, May 20, 2008 −− Renesas Technology Corp. today announced the development of the RX600 Series microcontrollers (MCUs), re-defining performance capabilities of CISC (Complex Instruction Set Computer)*1 based MCUs.

ISL54405 - CD/MP3 Quality Stereo 2:1 Multiplexer with Click and Pop Elimination - The Intersil ISL54405 is a single supply, bidirectional, dual single-pole/double-throw (SPDT) ultra low distortion, high OFF-Isolation analog switch that can pass analog signals that are positive and negative with respect to ground. It is primarily targeted at consumer and professional audio switching applications such as Computer Sound Cards and Home Theater products. The inputs can accommodate ground referenced signals up to 2VRMS while operating from a single 3.3V or 5V DC supply. The digital logic inputs are 1.8V logic-compatible when using a single 3.3V or 5V supply. It can be used in both AC or DC coupled ground referenced applications.

ISL6265 - Multi-Output Controller with Integrated MOSFET Drivers for AMD SVI Capable Mobile CPUs - The ISL6265 is a multi-output controller with embedded gate drivers. A single-phase controller powers the Northbridge (VDDNB) portion of the CPU. The two remaining controller channels can be configured for two-phase or individual single-phase outputs. For uniplane CPU applications, the ISL6265 is configured as a two-phase buck converter. This allows the controller to interleave channels to effectively double the output voltage ripple frequency and thereby reduce output voltage ripple amplitude with fewer components, lower component cost, reduced power dissipation, and smaller area. For dual-plane processors, the ISL6265 can be configured as independent single-phase controllers powering VDD0 and VDD1.

Amplifiers and Linear INA210 Voltage Output, High/Low-Side Measurement, Bi-Directional Zero-Drift Series Current Shunt Monitor - The INA210, INA211, INA212, INA213, and INA214 are voltage output current shunt monitors that can sense drops across shunts at common-mode voltages from -0.3V to 26V, independent of the supply voltage. Five fixed gains are available: 50V/V, 100V/V, 200V/V, 500V/V, or 1000V/V. The low offset of the Zerų-Drift architecture...

Power Management TPS60252 High Efficiency Charge Pump for 7 WLEDs with I2C Interface - The TPS60250/2 are high efficiency, constant frequency charge pump DC/DC converters that use dual mode 1× and 1.5× conversions to maximize efficiency over the input voltage range. The devices drive up to five white LEDs for the main display and up to two white LEDs for the sub display with regulated constant...

Analog Devices Introduces Industry’s First Digital Isolators Qualified For Automotive Systems - Unlike the relatively low-voltage signals powering most in-car entertainment, safety, and power train systems, hybrid-vehicle batteries can operate at voltages in excess of 600 V, which creates a need to galvanically isolate system-critical electronics.

Infineon Offers PFC and FOC on XC878 Series of 8-bit Microcontrollers for Energy Efficient Motor Drives - Neubiberg, Germany – May 19, 2008 – Infineon Technologies AG (FSE/NYSE: IFX) today announced that they have added another series of cost-effective 8-bit microcontrollers (MCUs) to its powerful XC800 family.

Altera Announces Industry’s First 40-nm FPGAs and HardCopy ASICs - Stratix IV FPGAs and HardCopy IV ASICs Both Offer Transceiver Options San Jose, Calif., May 19, 2008—Enabling designers to achieve new levels of integration and innovation, Altera Corporation (NASDAQ: ALTR) today announced the industry’s first 40-nm FPGAs and HardCopy® ASICs.

AD7949: 14-Bit, 8-Channel, 250 kSPS PulSAR® ADC - The AD7949 is an 8-channel, 14-bit, charge redistribution successive approximation register (SAR) analog-to-digital converter (ADC) that operates from a single power supply, VDD.

Clocks and Timers SN74SSQE32882 28-Bit to 56-Bit Registered Buffer with Address-Parity Test - Features1-to-2 Register Outputs and 1-to-4 Clock Pair Outputs Support Stacked DDR3 DIMMsChip Select Inputs Prevent Data Outputs from Changing State and Minimize System Power Consumption1.

Data Converters ADS5560 16-bit 40MSPS Low Power ADC with Selectable LVDS/CMOS Outputs - ADS556X is a high performance 16-bit A/D converter family with sampling rates up to 80 MSPS. It supports very high SNR for input frequencies in the first Nyquist zone. The device includes a low frequency noise suppression mode that improves the noise from dc to about 1MHz. In addition to high performance, the device offers several...

Interface SN65HVD1791 70-V Fault-Protected RS-485 Transceivers Full-Duplex - These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model specifications. These devices combine a differential...

Interface TLK3134 4-Ch 600 Mbps to 3.75 Gbps Multi-Rate Transceiver - The TLK3134 is a flexible four-channel independently configurable serial transceiver. It can be configured to be compliant with the 10Gbps Ethernet XAUI specification. It can also be configured to be compliant with the 1000Base-X 1Gbps Ethernet Specification (Auto-Negotiation not supported). The TLK3134 provides high-speed...

Power Management TPS2066 Dual 1A Current-Limited, Power-Distribution Switches - The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70-mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is...

MAX17005, MAX17006, MAX17015 - 1.2MHz, high-performance battery-charger ICs minimize solution cost and size

MAX17005, MAX17006, MAX17015 - 1.2MHz, high-performance battery-charger ICs minimize solution cost and size

The MAX17005 charges three to four cells with a cell voltage of 4.2V to 4.4V; the MAX17006 charges two to three cells with a cell voltage of 4.2V to 4.4V; and the MAX17015 adjusts the charge-voltage setting and number of cells through a feedback resistor-divider at the output. [Read more...]

Vishay Releases New VEMT Series of Silicon NPN Phototransistors

05.04.2008 17:30 - Source: Vishay

Featuring 2-µs Rise and Fall Times and ± 60° Angle of Half Intensity, Devices are 100 % Compatible with Current TEMT Series for Easy Replacement

MALVERN, Pa. — April 4, 2008 — Vishay Intertechnology, Inc. (NYSE: VSH) continues to broaden its optoelectronics portfolio with the release of a new series of wide-angle phototransistors in a PLCC-2 surface mount package that is compatible with lead (Pb)-free soldering. Devices in the VEMT series serve as pin-to-pin and functional equivalents for the current TEMT series of phototransistors, enabling simple and quick migration to meet lead (Pb)-free soldering requirements.

Vishay’s current TEMT series of phototransistors are lead (Pb)-free PLCC-2 devices, but they require lead (Pb)-based solder. The new VEMT series of phototransistors feature the same specifications as the TEMT series devices, but are compatible with lead (Pb)-free reflow soldering processes according to JEDEC-STD-020D. Optical, electrical, and mechanical compatibility allow for easy replacement of the TEMT phototransistors.

The VEMT3700, VEMT3700F, and VEMT4700 are optimized for object sensing, optical switching, proximity sensing, shaft encoding, data transmission, thumb wheel sensors, and touch key applications in distribution products such as ATMs, coin machines, and vending machines; consumer products; and automotive, EMS, and industrial systems.

Device Specification Table

Part number	Peak Wavelength (nm)	Bandwidth³ (nm)	Collector Light Current², I_ca (mA)	Angle of Half Sensitivity (±°)	Rise and Fall Time¹, t_r/t_f (µs)
VEMT3700	850	450 to 1100	0.5	60	2
VEMT3700F	940	830 to 1100	0.5	60	2
VEMT4700	850	450 to 1080	0.5	60	2
Note 1 - Speed: R_L = 100 , = 950 nm, V = 5 V Note 2 - Collector Light Current: V_CE = 5 V, Ee =1 mW/cm², =950 nm, typical Note 3 . Bandwidth _0.1 nm

Samples and production quantities of the new VEMT series of phototransistors are available now, with lead times of four to six weeks.

VEMT

Products mentioned:

Original text is here