Electronic Engineering News Digest Electronic Engineering News Digest
Electronic Engineering News COMPONENT NEWS | INDUSTRY NEWS | RoHS/WEEE NEWS |   
Latest News

ISL54217 - USB 2.0 High-Speed x 2Channels/Stereo Audio Dual SP3T (Dual 3 to 1 Multiplexer) - The Intersil ISL54217 is a single supply dual SP3T analog switch that operates from a single supply in the range of 2.7V to 4.6V. It was designed to multiplex between audio stereo signals and two different USB 2.0 high speed differential data signals. The audio channels allow signal swings below ground, allowing the multiplexing of voice and data signals through a common headphone connector in Personal Media Players and other portable battery powered devices. 

Cree Announces Sample Release of New, Highly-Efficient 120-watt GaN HEMT Microwave Transistor - DURHAM, N.C., DECEMBER 17, 2008 — Cree, Inc. (Nasdaq: CREE), announces the sample release of a highly efficient 120-watt GaN HEMT microwave transistor for general-purpose military and industrial applications such as electronic warfare, tactical communications, radar, instrumentation and direct video broadcast applications. This transistor provides outstanding RF power performance over wide instantaneous bandwidths compared to other technologies such as GaAs MESFET or Si LDMOSFET.

Vishay Releases Industry’s First White PowerSMD LEDs to Utilize InGaN/TAG on Sapphire Technology in CLCC-2Flat Ceramic Package With Ultra-Low 0.75-mm Profile - VLMW84.. devices combine low thermal resistance down to 25 K/W and high optical power from 5600 mcd to 14000 mcd for high-volume applications.

MAX16834 - Highly Efficient, Flexible HB LED Driver Supports Green Lighting Designs - The MAX16834 is a current-mode, HB LED driver for boost, buck-boost, SEPIC, and high-side buck topologies. This device reduces the size, complexity, and cost of LED driver solutions, simplifying the implementation of green lighting technology.

Amplifiers and Linear TPA2100P1 19-Vpp Mono Class-D Audio Amplifier for Piezo/Ceramic Speakers (TPA2100) - The TPA2100P1 (sometimes referred to as TPA2100) is a mono, Class-D audio power amplifier with integrated DC-DC converter designed for piezo and ceramic speakers. The TPA2100P1 (TPA2100) is capable of driving a ceramic / piezo speaker with 19 VPP (6.7 VRMS) from a 2.5 V power supply at less than 1% THD+N.The DC-DC converter...

Power Management BQ24104 Synchronous Switchmode, Li-Ion & Li-Pol Charge Mngmt IC (bqSwitcher) - The bqSWITCHER series are highly integrated Li-ion and Li-polymer switch-mode charge management devices targeted at a wide range of portable applications. The bqSWITCHER series offers integrated synchronous PWM controller and power FETs, high-accuracy current and voltage regulation, charge preconditioning, charge...

Power Management BQ27541 Single Cell Li-Ion Battery Fuel Gauge for Battery Pack Integration - The Texas Instruments bq27541 Li-Ion battery fuel gauge is a microcontroller peripheral that provides fuel gauging for single-cell Li-Ion battery packs. The device requires little system microcontroller firmware development for accurate battery fuel gauging. The bq27541 resides within the battery pack or on the system's...

Power Management TPS54232 2A, 28V, 1MHz Step Down SWIFT (tm) DC/DC Converter with Eco-Mode (tm) - The TPS54232 is a 28-V, non-synchronous buck converter that integrates a low Rds(on) high side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1 µA shutdown supply current allows the device to be used in battery powered applications....

Power Management TPS650250 Power Management IC for Li-Ion Powered Systems - The TPS650250 is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS650250 provides three highly efficient, step-down converters targeted at providing the core voltage, peripheral, I/O and memory rails in a processor based system. All three...

Power Management TPS71401 10V, Single Output LDO, 80mA, Adj.(1.2 to 8.88V),Low Quiescent Current - The TPS714xx low-dropout (LDO) voltage regulators offer the benefits of wide input voltage range, low-dropout voltage, low-power operation, and miniaturized packaging. These devices, which operate over an input range of 2.5V to 10V, are stable with any capacitor ≥ 0.47µF. The 2.5V to 10V input voltage range, combined...

Power Management TPS71433 10V Single Output LDO, 80mA, Fixed(3.3V), Low Quiescent Current - The TPS714xx low-dropout (LDO) voltage regulators offer the benefits of wide input voltage range, low-dropout voltage, low-power operation, and miniaturized packaging. These devices, which operate over an input range of 2.5V to 10V, are stable with any capacitor ≥ 0.47µF. The 2.5V to 10V input voltage range, combined...

GCT’s GDM7205K is the first and only monolithic single-chip solution that is WiMAX Forum Certified - GCT’s GDM7205K is the first and only monolithic single-chip solution that is WiMAX Forum Certified™ San Jose CA, September 3, 2008 - GCT Semiconductor, a leading supplier of Mobile WiMAX solutions to the global market, today announced that the industry's first Mobile WiMAX 2.

Fujitsu Develops CMOS Logic-Based High-Voltage Transistor for Power Amplifiers - Fujitsu Laboratories Limited and Fujitsu Microelectronics Limited today announced the development of a CMOS logic process-based high-voltage transistor featuring high breakdown voltage, suitable for power amplifiers used in wireless devices. As a world's first, Fujitsu developed a 45 nanometer (45nm)-generation CMOS-based transistor capable of handling 10V power output, thus enabling the transistor to handle high-output requirements necessary for power amplifiers used in WiMAX and other high-frequency applications. The new technology makes it possible for power amplifiers to be formed on the same die as CMOS-logic control circuitry to achieve single-chip integration, thereby making high-performance, low-cost power amplifiers feasible.

Micrel Tunes In With New Fully Integrated, Wide-Input Range Boost Regulators - Micrel Tunes In With New Fully Integrated, Wide-Input Range Boost Regulators San Jose, Calif., Dec. 16, 2008 — Micrel Inc.

NEC Electronics Extends Support for Automotive Audio and Navigation Control Systems with New 32-Bit Microcontrollers Boasting Industry's Highest Built-In Flash Memory Capacity - New V850E/Sx3-H Microcontrollers Offer 1.5 Megabytes of Flash Memory, Improved CPU Performance and Integrated Noise-Reduction Circuitry KAWASAKI, Japan, DUESSELDORF, Germany, SANTA CLARA, Calif.

News ArchiveElectronic News Digest RSS Feed
Add to My Yahoo! Add to Google Add to del.icio.us Add to Blinklist Add to Shadows
Vishay Siliconix Releases New 20-V and 30-VP-Channel Power MOSFETs With Industry’s Lowest On-Resistance

Vishay Siliconix Releases New 20-V and 30-VP-Channel Power MOSFETs With Industry’s Lowest On-Resistance

The devices will be used as the adaptor switch and for load switching applications in notebook computers and industrial/general systems. Adaptor switches (switching between the adaptor/wall power and the battery power) are always on and drawing current. The lower on-resistance of the Si7135DP and Si7633DP translates into lower power consumption, saving power and prolonging battery life between charges. [Read more...]

 

Winbond releases 8bit MCU and 32bit SoC at eMEX

17.10.2006 12:30 - Source: Winbond Electronics

Winbond has now launched its highly integrated W90P710 / W90N745 general purpose system-on-chip (SoC) in combination with a comprehensive development suite. This will shorten the time required for system vendors to develop new products and help them quickly bring new products to market. For the W90P710 / W90N745, Winbond uses the high performance 32 bit ARM7TDMI core from ARM® Limited and integrates it with a built-in Ethernet MAC. The W90P710 / W90N745 also includes an USB2.0 full speed Host/Device Controller enabling applications to connect to computer peripherals through the USB interface, enhancing the product's overall added-value.

Winbond had previously accumulated a great deal of experience in designing and integrating SoC solutions. Based on strong customer demand, Winbond acquired the full licensing from ARM®to provide the highly integrated W90P710 / W90N745 general-purpose SoC and its corresponding total solution. A wide range of complete SoC solutions are also planned to meet the long-term needs of customer products.

Winbond's W90P710 / W90N745 uses the ARM7TDMI microprocessor core manufactured using a 0.18um process. During normal operations it can reach frequencies of 80MHz, while the 176Pin/128-Pin LQPF packaging provides improved power conservation and lower cost. The W90P710 / W90N745 comes with 4KB Cache. These can also be set by product developers to serve as On-Chip RAM if necessary.

The W90P710 / W90N745 incorporates a very flexible External Bus Interface that allows direct access I/O components such as ROM, Flash, SDRAM and PCMCIA Card. W90P710 even provides for screen displays a high definition TFT/STN LCD controller. Apart from USB and EBI, W90P710 / W90N745 also provides 4 UART interfaces that customers can design to connect to more equipment such as a bar-code scanner, VFD module, debug port and Bluetooth® module.

In terms of system integration, apart from POS (Point-of-Sale) applications, the W90P710 is also suitable for data collectors, electronic picture frames or other products that utilize a LCD display. The W90N745 on the other hand is suited to network applications such as management switch, IP camera, VoIP and printer server.

Apart from the 32bit SoC, Winbond Electronics is also releasing the 8-bit LPC MCU W79E82x series. This includes the W79E825, W79E824, W79E823, W79E822 and W79E821, with the series designed for MCUs that require a small packaged size, little I/O and small Flash memory capacity. These are suited to standard industrial products such as UPS, power supply control, charger and access security. Customers are now placing samples of this design solution.

The advantage of the series is its high processing speed as it can achieve up to 2.5 times the performance of the traditional 8051 at the same operating frequency. It can reach processing speeds of up to 20MHz, with 1K to 16K of internal Flash ROM and a small 20pin packaging, making it suitable for different categories of products. It also incorporates the Watch Dog Timer allowing different scheduling settings and a low power voltage reset function, providing customers with a more reliable product that satisfies the need for high quality.

The Winbond W79E82x series is also designed for products that require high noise immunity. Its internal protective circuitry has been reinforced to meet the requirement of working environments. PWM output is also provided to control motor RPM ensuring optimal wear. Apart from the above, the W79E82x series also offers 4 channels ADC (analog-to-digital converter) for capturing external signals. The I/O pins are equipped with interrupts providing real-time processing response.

The product's development environment also includes the JTAG emulator, software development system, compiler and supporting documentation. This comprehensive development suite will help designers to shorten product development cycles and entry into the market quickly. Choose the W79E82x series, its ICP (In Circuit Program) function can be used to update the system online through the compiler, improving its flexibility and expandability for customers.

Winbond has for many years devoted itself to development of more advanced and competitive SoC solutions to meet different customer requirements. Through ceaseless effort, we ensure that our customers's products are more competitiveness in the market and have a good reputation, resulting in a win-win situation for both parties.

Original text is here