Electronic Engineering News Digest Electronic Engineering News Digest
Electronic Engineering News COMPONENT NEWS | INDUSTRY NEWS | RoHS/WEEE NEWS |   
Latest News

iNEMI forms HFR-Free Leadership Program - The International Electronics Manufacturing Initiative (iNEMI) has launched a HFR (halogenated flame retardant)-Free Leadership Program.

Green Manufacturing Expo – Chicago in September - The Green Manufacturing Expo will be held on September 22-24 in Rosemont, Ill. The expo was created to provide a wide spectrum of economically sound solutions for the manufacturing enterprise interested in improving process efficiency, reducing costs, and conserving energy and resources.

Voids found in lead-free solder joints - According to an article in Electronics Weekly, a UK-based sister publication of Design News, a researcher at the UK’s University of Leicester has discovered detrimental voids in lead-free solder joints.

GreenSoft launches GreenData Manager - REACH workgroup - The workgroup edition was created to offer a complete compliance data management system for RoHS, REACH and REACH SVHC (substances of very high concern). The workgroup product was designed for multiple users nad tailored to medium-to-large enterprises.

An argument for leaded solder in servers - Here’s a pretty good argument for leaded solder. In a blog on ServerWatch, technology writer, Drew Robb, argues the merits of using leaded solder. Much of the electronics industry agrees, but the reality is lead-free has become the forced norm for most electronic products.

REACH hits the EU this month - As of June 1, 2009, all European Union suppliers are required to comply with a raft of substance restrictions under the REACH regulation.

House considers RoHS-like bill - The U.S. House of Representatives is considering a RoHS-like bill that would become part of the Toxic Substances Control Act. The Environmental Design of Electrical Equipment is more limited than RoHS, according to Gary Nevison of Farnell, a London-based components distributor.

Lasky: Lead-free is plenty reliable -   With more than two years into the lead-free conversion, it’s become clear lead-free components are reliable. According to Dr. Ronald Lasky, senior technologist with Indium and a professor at Dartmouth University says the surprise of RoHS is that reliability has not been an issue.

Tin, silver, copper becomes standard for RoHS solder - According to an article by Mitch Holtzer of Cookson Electronics that appeared in SMT Online, tin/silver/copper (SAC) alloys have become the industry standard lead-free solders since RoHS went into effect.

How will RoHS changes affect medical equipment? - New RoHS changes will impact medical devices. Many of the exemptions that kept RoHS from restricting medical devices will be lifted. Fred Loneker, a senior manager with Environ International Corp.

Engineers need to track RoHS changes - The European Commission is about to drop six exemptions from the RoHS directive. While a move of this order was expected, it still shows that design engineers need to be cognizant of changes in environmental regulations.  the components they chose yesterday may not be compliant today.

Six RoHS exemptions cut - In the latest round of RoHS changes, six exemptions will be retired from the directive’s list of 29 exemptions. In an article in EDN, a Design News sister site, Gary Nevison of Newark and Farnell explains which six exemptions will expire over the next two years.

The impact of environmental regulations on electronics manufacturers - Here’s an in-depth paper that covers the Impact of Environmental Regulations on Electronic Manufacturers. Michael Kirschner, president of Design Chain Associates, a firm the helps companies comply with regulations, authored the paper for the December 2008 Conference on Resource Recycling.

SaaS eco-software for REACH and RoHS - Green EcoSystems Group of Colorado Springs, Colo. has introduced Green -EcoSystems software-as-a-service designed to help manufacturing companies address requirements related to the REACH directive. The tool also supports RoHS compliance.

Selecting the right lead-free connector design - RoHS laws have affected manufacturing processes as well as changing the nature of electronic components. The article, “Designing for RoHS: Select the right lead-free-connector design for heat-sensitive applications,” explores the RoHS-compliant alternatives for design engineers.

News ArchiveElectronic News Digest RSS Feed
Add to My Yahoo! Add to Google Add to del.icio.us Add to Blinklist Add to Shadows

iNEMI forms SnPb BGA task group for exempt OEMs

12.11.2006 02:30 - Source: Lead-Free Zone Blog

The International Electronics Manufacturing Initiative (iNEMI), an electronics industry group, has organized a SnPb Availability Task Group to address the needs of OEMs that are taking the lead exemption from (or those who products are of out the scope of) the European Union’s RoHS directive. The goal is to make sure high-reliability leaded BGA components will not be discontinued by parts suppliers.

The new group has scheduled a workshop to bring together OEMs and the BGA supply base on Wednesday, January 24 in or near San Jose. Watch the iNEMI website for further details on the meeting time and place.

The iNEMI task group will focus its efforts on ways to work with the BGA component suppliers (which will include integrated circuit as well as packing firms) to support SnPb-compatible BGAs, assist with questions of long-term reliability, and develop other solutions to address concerns.

The group plants to:

Original text is here